雷蛇DeathAdder V2游戏鼠标

Razer Deathadder V2DeathAdder是Razer外围产品系列的骨干,是一款基本的右手,有线游戏鼠标,具有独特的顶部外壳。(在2019年,该公司宣布已在整个系列中售出1000万台。)除去年缩减的Essential型号外,自2016年DeathAdder Elite以来,这只特许鼠标没有得到重大更新。 69.99美元的价格DeathAdder V2结合了最新的Razer新技术,带来了旧的可靠的最新信息,其中包括超级强大的Focus光学传感器,红外光学开关以及鼠标底部的专用轮廓切换按钮。 这些更新创建的设备可以与任何其他主流游戏鼠标相提并论,尽管它们没有带来使V2脱颖而出的新杀手级功能。

让经典符合规范

仅看一眼,你很难看出DeathAdder V2和它最近的任何上一代产品之间的区别。 标志性的DeathAdder形状返回-典型的右手设计,带有向两侧展开的大型单击面板。 两个RGB照明元素是相同的:滚动轮的两侧亮起,底座上的徽标也亮起。

 

按钮的数量已经从七个增加到八个:两个主要点击面板,一个滚轮按钮,以及位于顶部中心列的两个DPI开关按钮,加上侧面熟悉的前进和后退按钮,以及在底部增加的按钮,可以让你循环浏览DeathAdder的新机载配置文件。

Deathadder正面图片
Deathadder正面图片

DeathAdder长期如此受欢迎有原因的:它的形状创造了一种极其舒适的手感。 虽然V2看起来也一样,但它并不完全相同。它的尺寸为1.5×2.7×5英寸,比Razer的Basilisk旗舰版略小。DeathAdder V2的重量也是2.9盎司,与DeathAdder Elite(3.7盎司)相比有了很大的下降。 过了这么久,我终于发现了一个小瑕疵:侧面的按钮比我想要的稍微靠后一点,迫使你把拇指向后弯。不过,除了偶尔的中断,DeathAdder v2提供了一次非常舒适的体验。


虽然说鼠标的外形非常重要,但是距离初代DeathAdder发布已经过去10多年了;现在的市场上,你完全可以花很少的钱就可以买到类似外形设计的鼠标。

Deathadder 滚轮
Deathadder 滚轮

这次DeathAdder V2也做了重大更新:V2配备了Razer的焦点传感器,它的跟踪速度高达2万dpi,速度高达每秒650英寸。这是一个相当大的升级,特别是在精度方面,尽管大多数人不会经常看到。 点击面板下的开关,现在是在Razer Viper中首次亮相的ESPORTS光学开关。雷蛇公司声称,这些组件都将每次点击响应时间减少了几分之一毫秒,并使面板明显更耐用。 我在雷蛇的一次活动中证实了这些说法,所以它们不是纯粹的吹牛皮,但是我对普通人能感受到旧型号的光学开关和欧姆龙开关之间区别是怀疑态度。 最后,Razer将DeathAdder的数据线更新为其编织的Speedflex材料,这种材料比许多其他鼠标尾巴缠绕得更少。 大多数鼠标缆线很少捆绑在一起,这是一个比较新颖的改进。


在Synapse中进行配置

所有Razer鼠标,包括DeathAdder V2,都支持Razer Synapse配置软件套件。 一如既往,Synapse可以轻松地映射按钮,更改多达五个预设DPI设置的灵敏度,以及定制鼠标的RGB照明。  

Profile Up In Synapse
Profile Up In Synapse

可以说,DeathAdder V2最大的改进是它的板载内存。您可以在鼠标上存储最多五个配置文件,您可以随身携带这些配置文件从一个设备到另一个设备。您还可以在您的家用机器上的Synapse中创建额外的帐户,将它们链接到特定的游戏,并随意将它们调入和调出板载内存。对于喜欢为自己喜欢的游戏创建不同配置的玩家来说,这是一个巨大的飞跃。 V2还提供了一些新的曲面校准选项。除了手动扫描鼠标垫,还有一个“智能跟踪”功能,可以自动校准升空和降落到1 mm到3 mm之间的特定高度。你可以选择保持这两个距离相同,或者不对称,允许更高的升空,同时需要稳固的着陆。 这是一个奇怪的中间立场:对我来说,对于非常特殊的高级用户来说,校准一直感觉是一个非常高端的功能,所以我不确定谁会想要自动化版本。尽管如此,选项越多越好,而且肯定不会从Synapse的标准校准工具中夺走任何东西。

Razer Deathaderv2游戏鼠标正面
Razer Deathaderv2游戏鼠标正面

不可否认的是,DeathAdder V2是一个伟大的鼠标,就像所有其他DeathAdder鼠标一样。它很轻,很舒服,而且有顶尖的部件。同时,当你将它与Razer‘s Viper和Basilisk进行比较时,我认为DeathAdder感觉有点不太对味儿,可能价格有点高吧。 话又说回来,这就是重点–DeathAdder已经成为一个标志性的名字,这既有期望,也有限制。 如果你正在寻找一款简单的有线右手游戏鼠标,DeathAdder V2基本上是你现在能买到的最好的了。

雷蛇DeathAdder V2游戏鼠标”有1个评论;

  1. Holy 说:

    Packaging was minimal, works perfectly fine! Good replacement for the old mouse.

  2. Amazon Customer 说:

    look i didn’t realize this was in used condition but im anything but sour about that! this mouse is great for people with bigger hands. rgb shines decently too, buttons are clicky and not spongey very timeless design that’s hard to beat for larger handed people

  3. Justin Lee 说:

    this mouse felt light when moving. not necessarily bad, but i prefer mice that have more heft to it. plastic felt thin. maybe thats what some folks prefer, but wasn’t for me.

  4. bestsides 说:

    Really disappointing buy. I purchased this mouse as a replacement for a Razer DeathAdder Chroma.It had a similar feel to my previous mouse (although surface was a little rougher) but was quite comfortable in my hand.After plugging it in, I was prompted to install the Razer Synapse 3 software to configure it. Installation was easy and they finally included a “Guest” option that doesn’t require a Razer account, which was a nice change.This was where things started to go downhill. I rebooted my machine to finish installing the software and noticed it took 5 additional seconds to shut down and boot into Windows. I figured it was just taking additional time to finish installing the software.This was not the case – the Razer Synapse software added 5s to both startup and shutdown times on a system with a fast PCIE SSD that normally takes a few seconds total.I uninstalled the software and rebooted again – low and behold my startup/shutdown times were back to normal.I re-downloaded the software from Razer and reinstalled. It again added the 5s.This is unacceptable – I also noticed it using significant system resources when idle.I figured – oh well crappy software, but I can probably work around it. So I went into Razer Synapse and set up the mouse and saved my profile to the onboard memory. I disabled Razer Synapse from automatically starting during startup and exited the program.It was about then that I noticed the mouse was doing the “color wheel” effect where it cycles between different colors. It didn’t save my lighting settings!I looked around on the forums and apparently this is by design – the onboard memory does not support saving macros or lighting effects (even a simple static color). In one post a Razer representative gave a BS answer about on-board memory being limited. In this day and age NAND is extremely cheap and adding a few bits (hell even doubling the on-board memory) would cost less than a cent. The truth is, the mouse was poorly designed.This is all not to mention that my previous Razer DeathAdder Chroma supported saving lighting effects to on-board memory. Completely unacceptable!!! I am returning this mouse and sticking with my old one until I can find another suitable replacement.

  5. bestsides 说:

    Really disappointing buy. I purchased this mouse as a replacement for a Razer DeathAdder Chroma.It had a similar feel to my previous mouse (although surface was a little rougher) but was quite comfortable in my hand.After plugging it in, I was prompted to install the Razer Synapse 3 software to configure it. Installation was easy and they finally included a “Guest” option that doesn’t require a Razer account, which was a nice change.This was where things started to go downhill. I rebooted my machine to finish installing the software and noticed it took 5 additional seconds to shut down and boot into Windows. I figured it was just taking additional time to finish installing the software.This was not the case – the Razer Synapse software added 5s to both startup and shutdown times on a system with a fast PCIE SSD that normally takes a few seconds total.I uninstalled the software and rebooted again – low and behold my startup/shutdown times were back to normal.I re-downloaded the software from Razer and reinstalled. It again added the 5s.This is unacceptable – I also noticed it using significant system resources when idle.I figured – oh well crappy software, but I can probably work around it. So I went into Razer Synapse and set up the mouse and saved my profile to the onboard memory. I disabled Razer Synapse from automatically starting during startup and exited the program.It was about then that I noticed the mouse was doing the “color wheel” effect where it cycles between different colors. It didn’t save my lighting settings!I looked around on the forums and apparently this is by design – the onboard memory does not support saving macros or lighting effects (even a simple static color). In one post a Razer representative gave a BS answer about on-board memory being limited. In this day and age NAND is extremely cheap and adding a few bits (hell even doubling the on-board memory) would cost less than a cent. The truth is, the mouse was poorly designed.This is all not to mention that my previous Razer DeathAdder Chroma supported saving lighting effects to on-board memory. Completely unacceptable!!! I am returning this mouse and sticking with my old one until I can find another suitable replacement.

  6. jo84 说:

    I’m really impressed, never thought I’d find a high quality gaming mouse for under $50 but this is it. Only two side buttons but that’s about all I use anyway, even when there’s a bunch of them. You can adjust the DPI in the software instead of having extra buttons on the mouse, which I like as well.The software that comes with it lets you adjust the brightness of the led and you can set it to sleep after 5, 10, or 15 minutes, or turn it off. Yes I love gaming but I’m not into all that rgb rainbow lighting, gigantic keyboards and mice that look like they came out of a comic book. Clean, white, and softly lit is very pleasing to me (I turned up the brightness for the pic, normally I keep it just a little brighter than the ambient lighting). Glorious PC makes a white mouse for $90 but it doesn’t have that simple, aesthetically pleasing look I was going for, it would have looked out of place on my desktop. Now I have to get a white xbone controller and my setup will be complete.

  7. jo84 说:

    我真的很感动,从来没想过能找到一款50元以内的高品质游戏鼠标,但就是这个。只有两个侧键,但反正我就只用这两个,即使有一堆按钮。你可以在软件中调整DPI,而不是在鼠标上有额外的按钮,这一点我也很喜欢.附带的软件可以让你调整led的亮度,你可以设置它在5,10或15分钟后睡觉,或者关闭它。是的,我喜欢游戏,但我不喜欢所有的RGB彩虹照明,巨大的键盘和鼠标,看起来像他们从漫画书中出来。干净、洁白、柔和的灯光是我非常喜欢的(我把图片的亮度调高了,平时我只保持比环境灯光亮一点)。光荣电脑生产的白色鼠标90元,但它没有我想要的那种简单、美观的外观,放在我的桌面上会显得格格不入。现在我得买一个白色的xbone控制器,我的设置就完成了。

发表评论

您的电子邮箱地址不会被公开。 必填项已用*标注